Outlast Mold Buster
Regular price $19.99
Outlast® Mold-Buster™ is an EPA-registered product designed to stop mold, mildew, and algae growth on paints, stains, coatings and adhesives.
Each 7.5 oz. container of Mold-Buster additive treats up to 5 gallons of paint or stain; or, it can be measured out in single gallon doses through the "view finder" strip on the side of the container. It does not alter the color of the coating and its thin viscosity allows easy mixing.
The formulation is freeze-thaw stable, and has low odor and low VOC. Suitable for use in oil and/or water-based coatings, Mold-Buster should still be working hard to protect the paint film after 3 years or more.
FEATURES OF OUTLAST® MOLD -BUSTER™ ADDITIVE
• Contains proven fungicide, IPBC
• Prevents growth of mold, mildew, algae
• Extends service life of coatings - less frequent cleaning needed
• Mixes readily with paints and stains
• Does not affect color or drying time
• Resists yellowing
• Works with oil-, water-, and solvent-based coatings
Use Outlast® Mold-Buster™ when additional protection is required to control surface mold, mildew, and algae growth on the coating. It is recommended for use with coatings applied in high humidity environments and for applications where mildew has been a problem in the past. Mold-Buster™ will not hurt the environment and is safe when used as directed. DO NOT treat over existing mold, mildew, or algae. Always sanitize the substrate and clean thoroughly before re-coating. Prepare the surface prior to painting by cleaning and scrubbing with water and detergent. You may use a suitable alternative cleansing system such as Outlast® KleenStart. Always rinse all soap or cleaning chemical residue thoroughly after use. Make sure the surface is dry before coating. All visible signs of discoloration should be removed prior to recoating. Outlast® Mold-Buster™ can help extend the service life of nearly any coating. Impressive results are achieved when the Additive is used in a combination approach: